trace setmode

Sets the trace mode.

There are two modes:

  • Default
  • Continuous

In default mode, all trace messages are saved in a memory buffer. If there is an error, the buffer is dumped to stdout. In continuous mode, every allowed trace message is dumped to stdout in real time.

Syntax

CLI 
maprcli trace setmode
    [ -host <host> ]
    -mode default|continuous
    [ -port <port> ]
REST

None.

Parameters

Parameter

Description

host

The IP address of the host on which to set the trace mode

mode

The trace mode.

port

The port to use.

Examples

Set the trace mode to continuous:

CLI 
maprcli trace setmode -mode continuous