Workflow: MapR Installer Upgrade
This page summarizes the steps for upgrading from MapR 5.2.x to MapR 6.1.x by using the MapR Installer.
In this workflow, the cluster to be upgraded is nonsecure; after the upgrade, the cluster will continue to be nonsecure, but can be secured by using the Incremental Install function of the MapR Installer.
Installer Upgrade Summary
In an upgrade using the MapR Installer, the Installer shuts down
MapR core on the entire cluster, upgrades and configures MapR core, starts MapR core, upgrades
EEP components, and then starts the EEP components. Like the offline manual upgrade, the MapR Installer upgrade is an offline upgrade. The MapR Installer upgrade requires you to:
- Plan for the upgrade.
- Update the MapR Installer to version 1.10.
- Launch the Installer and select Version Upgrade.
- Complete the upgrade through the Installer.
- Manually merge custom configuration settings.
- Perform post-upgrade checks.
The workflow later on this page provides more detail to help you get started with the MapR Installer upgrade.
Considerations for MapR Installer Upgrades
Before upgrading using the MapR Installer, note these
considerations:
- Upgrades using the MapR Installer are supported only from release 5.2.x with EEP 3.0.1 or later.
- If security is enabled on the cluster – either MapR default security or custom security – you cannot upgrade from release 5.2.x using the MapR Installer; you must use one of the manual upgrade workflows. Note that upgrades from secure release 6.0.0 or 6.0.1 clusters can be done using the MapR Installer, as described in Planning Your MapR Core Upgrade.
- Security settings cannot be changed during a version upgrade using the MapR Installer.
- Before upgrading using the MapR Installer, you must update the installer to version 1.10 or later.
- This procedure assumes that the cluster was originally installed using the MapR Installer or a MapR Installer Stanza. If the cluster was installed manually, you must use the manual steps to upgrade or use probe and import to generate the installer database.
- When upgrading to release 6.1 using the MapR Installer, EEP 3.0.1 or later is upgraded automatically to EEP 6.0.0.
MapR Installer Upgrade Workflow
High-Level Steps | Detailed Information (review all items unless noted otherwise) |
---|---|
1. Understand MapR Core/MEP Dependencies | |
2. Plan for the MapR Core Upgrade | |
3. Plan for the EEP Upgrade | |
4. Perform Pre-Upgrade Steps for MapR Core | |
5. Prepare to Upgrade EEP Components | |
6. Upgrade the MapR Installer to Version 1.10 | |
7. Halt Jobs and Applications | |
8. Launch the MapR Installer | |
9. Select the Version Upgrade Option | |
10. Complete the Upgrade Through the Installer | |
11. Perform Post-Upgrade Steps for MapR Core | |
12. Perform Post-Upgrade Steps for EEP | |
13. Secure the Upgraded Cluster |