Preparing to Upgrade MapR Core
Complete these pre-upgrade steps for MapR Core.
After you have planned your upgrade process, prepare the cluster for upgrade while your existing cluster is fully operational. Prepare to upgrade as described in this section to minimize downtime and eliminate unnecessary risk. Design and run health tests and back up critical data. Performing these tasks during upgrading reduces the number of times you have to touch each node, but increases down-time during upgrade. Upgrade a test cluster before upgrading your production cluster.
Complete these pre-upgrade steps:
1. Verify System Requirements for All Nodes
Verify that all nodes meet the following minimum requirements for the new version of MapR software:
- Software dependencies. Package dependencies in the MapR distribution can change from version to version. If the new version of MapR has dependencies that were not present in the older version, you must address them on all nodes before upgrading MapR software. Installing dependency packages can be done while the cluster is operational. See the packages and dependencies for your MapR version (for example Packages and Dependencies for MapR 5.2.1). If you are using a package manager, you can specify a repository that contains the dependency package(s), and allow the package manager to automatically install them when you upgrade the MapR packages. If you are installing from package files, you must pre-install dependencies on all nodes manually.
- Hardware requirements. The newer version of packages might have greater hardware requirements. Hardware requirements must be met before upgrading.
- OS requirements. MapR OS requirements do not change frequently. If the OS on a node doesn’t meet the requirements for the newer version of MapR, plan to decommission the node and re-deploy it with an updated OS after the upgrade.
- Certificate requirements. Recent versions of Safari and Chrome web browsers have removed support for older certificate cipher algorithms, including those used by some versions of MapR. For more information on resolving this issue, see Unable to Establish a Secure Connection.
2. Design Health Checks
Plan what kind of test jobs and scripts you will use to verify cluster health as part of the upgrade process. You will verify cluster health several times before, during, and after upgrade to ensure success at every step, and to isolate issues whenever they occur. Create both simple tests to verify that cluster services start and respond, as well as non-trivial tests that verify workload-specific aspects of your cluster.
Design Simple Tests
Here are a few examples of simple tests you can design to check node health:
- Use maprcli commands to see if any alerts exist and to verify that services are running
as expected. For example:
# maprcli node list -columns svc service hostname ip tasktracker,cldb,fileserver,hoststats centos55 10.10.82.55 tasktracker,hbregionserver,fileserver,hoststats centos56 10.10.82.56 fileserver,tasktracker,hbregionserver,hoststats centos57 10.10.82.57 fileserver,tasktracker,hbregionserver,webserver,hoststats centos58 10.10.82.58 ...lines deleted... # maprcli alarm list alarm state description entity alarm name alarm statechange time 1 One or more licenses is about to expire within 25 days CLUSTER CLUSTER_ALARM_LICENSE_NEAR_EXPIRATION 1366142919009 1 Can not determine if service: nfs is running. Check logs at: /opt/mapr/logs/nfsserver.log centos58 NODE_ALARM_SERVICE_NFS_DOWN 1366194786905
In this example you can see that an alarm is raised indicating that MapR is expecting an NFS server to be running on node centos58, and the node list of running services confirms that the nfs service is not running on this node.
- Batch create a set of test files.
- Submit a MapReduce job.
- Run simple checks on installed Hadoop ecosystem components. For example:
- Run a Hive query.
- Do a
put
andget
from HBase. - Run
hbase hbck
to verify consistency of the HBase datastore. Address any issues that are found.
Design Non-trivial Tests
- Run performance benchmarks relevant to the cluster’s typical workload.
- Run a suite of common jobs. Inspect for correct results and deviation from expected completion times.
- Test correct inter-operation of all components in the Hadoop stack and third-party tools.
- Confirm the integrity of critical data stored on cluster.
3. Verify Cluster Health
- Run the suite of simple tests to verify that basic features of the MapR core are functioning correctly, and that any alarms are known and accounted for.
- Run the suite of non-trivial tests to verify that the cluster is running as expected for typical workload, including integration with Hadoop ecosystem components and third-party tools.
4. Back Up Critical Data
Data in the MapR cluster persists across upgrades from version to version. However, as a precaution you might want to back up critical data before upgrading. If you deem it practical and necessary, you can do any of the following:
- Copy data out of the cluster using
distcp
to a separate, non-Hadoop datastore. - Mirror critical volume(s) into a separate MapR cluster, creating a read-only copy of the data which can be accessed via the other cluster.
When services for the new version are activated, MapR-FS will update data on disk automatically. The migration is transparent to users and administrators. Once the cluster is active with the new version, you cannot roll back.
5. Run Your Upgrade Plan on a Test Cluster
- Eliminate surprises. Get familiar with all upgrade operations you will perform as you upgrade the production cluster.
- Uncover any upgrade-related issues as early as possible so you can accommodate them in your upgrade plan. Look for issues in the upgrade process itself, as well as operational and integration issues that could arise after the upgrade.
6. Pause Cross-Cluster Operations
- Volume Mirroring. If volumes from another cluster are mirrored on this cluster,
use one of the following options to stop the mirroring of volumes on this cluster:
Using the MCS See Stopping a Mirror. Using a maprcli
commandRun the maprcli volume mirror stop
command on this cluster. See volume mirror stop. - Table Replication. If source tables on this cluster are replicated to tables on
another cluster, pause the replication of tables on this cluster. Use one of the
following options for each source table on this cluster:
Using the MCS - On MapR Tables view of the MCS, open the source table.
- On the Replica tab associated with the source table, select each replica and then click
Using a maprcli
commandRun the maprcli table replica pause
command. See table replica pause.
7. Prepare to Upgrade the MEP
Complete the pre-upgrade steps in Preparing to Upgrade the MEP. Then return to this section.
What's Next
Go to Upgrading MapR Core with the MapR Installer or Upgrading MapR Core Without the MapR Installer.